The C-shaped clamp base attaches easily to desks and work platforms.
The standard equipment is a 2 m cord with plug and AC adapter, which makes it easy to move and has a wide range of uses in work.
Inspection Lighting and Simple Task Lighting.
| Color Temperature | 5,700K |
|---|---|
| Service Life | Ambient temperature 25℃ 60,000 hours ※Life span is based on initial illumination reduced to 70% |
| Operating Temperature | -10℃~40℃ (referring to the condition without freezing) |
| Maximum Clamping Thickness | 40 mm |
| Standard Wiring | Wall-Plug AC/DC Adapter |
| Certification |
|
| Optional Selection | Color Temperature=4000K |
IEEE 1789 (Recommended Practices for Modulating Current in High-Brightness LEDs for Mitigating Health Risks to Viewers) recommends a flicker percentage of 8% or less. At around 3%, flicker is barely perceptible to the human eye.
NIKKI LED lights feature an exclusive low-flicker design that reduces the flicker percentage to less than 2%. This minimizes flicker not only during standard still-image and video recording, but also when capturing high-speed video at frame rates such as 240 fps. As a result, these lights are ideal for precision imaging applications, including machine vision, image inspection, and visual inspection.
※The image below shows illumination provided by a NIKKI LED light.
[General LED] Flickers and streaks may be observed during photography
[BT Series] Mild and even light, no flicker
Depending on the working environment and the content of the exposure, choose between 5700K and 4000K Color temperatures.








The C-shaped clamp base attaches easily to a desktop or work platform.
Surface-emitting LED lighting with dimming function; touch-sensitive dimming design with no stage dimming in the range of 20% to 100%.
When the power is turned on again, the brightness storage function can reproduce the brightness when the power is turned off and on again. (Lighting storage records will be reset if the electrical outlet is unplugged.)
LED's unique non-glare surface emitting lighting emits evenly and naturally, so your eyes will not feel tired even if used for a long time.
The low-reflection surface-emitting design improves visibility and is ideal for inspection lighting.
Dimmer switch (left): It can be dimmed from 20% brightness to 100% brightness, with
cyclic adjustment.
Power switch (right): Turns ON/OFF with just a light touch.
Visual Inspection, Simple Task Lighting, Image Inspection, and Display Lighting.
| Color Temperature | 5,700K |
|---|---|
| Service Life | Ambient temperature 40℃ 40,000 hours (25℃ 60,000 hours) ※Life span is based on initial illumination reduced to 70% |
| Operating Temperature | -10℃~40℃ (referring to the condition without freezing) |
| Clamping Thickness | 40 mm |
| Standard Wiring | Wall-Plug AC/DC Adapter (AC100 - 240V power supply) |
| Certification |
|
| Color Rendering Index | Ra80 |

| Model | Drawing | Luminous Flux | Illuminance (1 Meter) | Power Supply | Power Consumption |
|---|---|---|---|---|---|
| NLUD05BT-AC | PDF DXF | 540 lm | 280 lx | AC100 - 240V | 7W |
| NLUD05BT4-AC | PDF DXF | 540 lm | 280 lx | 7W | |
| NLUD10BT-AC | PDF DXF | 1,050 lm | 530 lx | 14W | |
| NLUD10BT4-AC | PDF DXF | 1,050 lm | 530 lx | 14W | |
| NLUD20BT-AC | PDF DXF | 1,600 lm | 800 lx | 21W | |
| NLUD120-15BT-AC | PDF DXF | 1,130 lm | 570 lx | 14W | |
| NLUD120-25BT-AC | PDF DXF | 2,080 lm | 1,030 lx | 27W |

| Model/Size (mm) | A |
|---|---|
| NLUD05BT | 308 |
| NLUD10BT | 483 |
| Model/Size (mm) | A |
|---|---|
| NLUD120-15BT | 245 |
| NLUD120-25BT | 420 |


