Dustproof and waterproof LED lighting
Cylinder type
Slim type
Spotlight type
Lighting for work and inspection
Surface emitting LED lighting
LED magnifying glass light
Warning light
Multilayer LED Warning light
Laminated warning light
Light guide column LED series
Outdoor lighting and advertising lighting
LED spotlight
Advertising floodlight
LED floodlight
LED floodlight
Ultra-low temperature freezer lamp
Series LED lighting
Factory-Environment Lighting
LED hanging floodlight
LED High bay light
Rechargeable LED light
Rechargeable LED light
Rechargeable LED floodlight
Plant lighting
Concentrated plant lights
Surface uniform light plant lamp
Cutting fluid hose
High pressure sprinkler head
Magnetic seat related application products
Product list
Product lineup
LED lighting
Dustproof and waterproof LED lighting
Flat LED light
Using high-power LED, energy-saving, high brightness, long life and maintenance-free. The flat design is suitable for installation in narrow places. Protection grade IP67 (dustproof and waterproof), most suitable for internal lighting of machine tools.
Tube type LED light
The use of high-power LEDs has many advantages such as power saving, high brightness, and long life. The light source is not easy to get hot and it is recommended to directly replace traditional fluorescent lamps. The cylindrical glass outer tube is highly translucent and waterproof.
Slim LED light
Ultra-thin LED lighting can be installed even in narrow spaces. The outer shell is PC
polycarbonate, which is lightweight and has excellent impact resistance.
The protection
level is IP65 (waterproof/dustproof) and can be used even in wet environments. Ideal for
control panel lighting and auxiliary lighting in factories.
Concentrated LED light series
The use of high-power LEDs has many advantages such as power saving, high brightness, and long life. Magnetic base type, can be attached to iron plates and other metals for use. The standard wiring is equipped with a plug, making it easy to move. It is a multi-purpose work lamp.
Work equipment/inspection lighting
Surface emitting LED light
The light guide type LED lighting device has a uniform light-emitting surface and can be used for lighting in machinery and equipment or for inspection lamp lighting. Built-in constant current device, there will be no different illumination due to changes in input voltage.
Magnetic stand LED light
Magnetic base LED lights can be attached to iron plates and other metals for use. Made of
solid metal snake tube, the swing is small and the lighting angle is easy to adjust.
It
can be used in a variety of applications such as additional lighting for machine tools and
on-site work lighting.
Desktop LED task light
Clamp-type LED lights can be used in various situations, such as table lamps for homes, offices, and factory workbench.
LED magnifying glass light
Using large optical white glass, the vision can be comfortable and clear. There are two types of magnification: 1.75x and 2.25x. The LED lighting is arranged in a circular arrangement, so the field of vision can be comfortable and clear during operation without shadows. Suppresses the unique glare of LED, making the light less likely to be reflected and not causing fatigue to the eyes. Because it does not flash bright light, it is suitable for taking photos and inspecting items.
Outdoor lighting and advertising lighting
LED spotlight
Provide bright beams of light projected on the advertising board to highlight the advertising effect. The lamp body is made of aluminum alloy with weather-resistant coating, and the arm is made of stainless steel. It is designed to be sturdy and not easily damaged and can be used to replace halogen lamps.
Advertising floodlight
Floodlights for outdoor use, suitable for building exterior wall lighting and advertising billboard lighting. Lightning surge protection design protects the lamps from damage caused by lightning.
Factory- Environment Lighting
LED hanging floodlight
The hanging floodlight has a 120° wide-angle illumination range and is suitable for environments with high facade brightness. It uses LEDs that are highly trusted in the world. The body is made of aluminum and the front is made of heat-treated glass. The whole is sturdy and not easy to be damaged. The hanging floodlight is equipped with an anti-fall steel cable for added safety protection.
LED High bay lights
It is an LED lighting device that is most suitable for use in factories, warehouses or large working machinery. It is equipped with lightning surge protection and anti-flicker circuits. Compared with previous mercury lamps, it has the advantages of energy saving, long life and no need for maintenance. With the built-in constant current power supply device, the illumination will not change even if the input voltage changes. The protection level is IP67 (dustproof, waterproof), which can prevent dust or oil smoke generated in the equipment from intruding into the lamp.
Series LED lights
A connected LED work light equipped with lightning protection and anti-flicker circuits. It is suitable for large manufacturing plants such as warehouses, construction sites, event venues, automobiles, ships, industrial machinery, etc. Because it has an internal series connection function (the same model can connect up to 15 lamps), it is very suitable for use in places that require a wide range of lighting applications.
LED floodlight
LED floodlight
LED floodlight equipped with lightning protection and flicker circuit protection. Ideal for lighting advertising billboards, lighting in parking lots, or lighting in factories or warehouses, etc. The independently developed protection circuit design protects against inrush current, surges or instantaneous power outages, and has a high insulation safety design. The light itself weighs 1.9kg, which is quite light and easy to carry. If equipped with a telescopic and folding tripod, it is quite suitable for temporary lighting in outdoor activities or construction sites.
Rechargeable LED floodlight
Using high-efficiency lithium-ion battery, the light can be continuously turned on for up to
20 hours. The brightness of the rechargeable floodlight has three levels (H) (M) (L) and
warning flash modes that can be switched. The main body is made of aluminum alloy
die-casting, which is very strong, lightweight and easy to carry. It can still be used with
confidence in outdoor activities or humid environments. It has good heat dissipation and
will not cause the lamp to get hot.
It is also waterproof, so it can be used safely even
on rainy days.
Freezer lamp (ultra-low temperature lamp)
The NLFZ series is an LED lamp specially designed for freezers. A temperature controller is added to the lamp. The heater starts running at -15°C and turns off the temperature controller when the temperature reaches 0°C.
Rechargeable LED lighting
Rechargeable LED light
Handheld rechargeable LED lighting that can be used for equipment inspection, event lighting and disaster prevention lighting in emergencies, with a charging time of 2.5 hours. The shell material is made of PVC polycarbonate, which is light and not easy to break. Can illuminate a wide range of natural light, and LED glare is less.
Rechargeable LED lighting
The main body is made of glass tube, which is resistant to cutting fluids and acid and alkali
solvents. It is a waterproof LED lighting with built-in battery.
In addition, there is no
need to connect wires when using the built-in battery, and it can be installed anywhere in
the machine through the base magnet.
Equipped with protection circuit to prevent
overcharge, over-discharge and high temperature.
Rechargeable LED floodlight
The rechargeable LED floodlight uses high-efficiency lithium-ion batteries and has a maximum continuous lighting time of 20 hours. The floodlight is made of aluminum alloy, which is very strong, lightweight and easy to carry. Plus, since it's rainproof, it's safe to use even on rainy days.
Plant lights
Concentrated plant lights
This plant growth lamp adopts a condenser style design, and its spectral energy is distributed in the 450nm (blue) and 660nm (red) regions. According to research, it is very suitable for helping plants photosynthesis, growth, flowering, and fruiting, and giving plants the appropriate amount of light to extend the life of indoor plants.
Surface uniform light plant lamp
This surface-emitting plant lamp has the characteristics of uniform light source and no glare. It also has an adjustable light source intensity design, which can flexibly adjust the light intensity. This plant growth lamp has spectral characteristics of 450nm (blue) and 660nm (red) light wave energy, which has a significant effect on the growth of plant branches and leaves, flowering and fruiting.
Warning light
Multilayer LED warning light
LED warning lights made of high-brightness LEDs. Available in five colors: red, yellow, green, blue, and white. High alertness is ensured through effective light reflection. To meet the needs of various customers, LED light layers can be freely matched and combined. Ideal for use as status display lights and warning lights for industrial machines.
Laminated warning light
The lightweight and streamlined LED Laminated warning light uses highly reliable and high-efficiency LEDs. It has the characteristics of bright illumination, lightweight, and low price. The warning light (indicator light) has five luminous colors: red, yellow, green, blue, and white. Various light colors can be arranged and combined at will, with up to five layers. The design of the transparent lamp shell makes the color clearly visible. Has good shock resistance.
Light guide column LED warning light
It emits light through the light guide column and through the transparent shell, so that the luminous surface can be easily seen from all angles. The independently developed protection circuit design protects against inrush currents, surges, or instantaneous power outages. And it has passed the vibration test and insulation resistance test, making it a very safe design. Folding base design allows it to be folded even when installed on machinery. By adjusting the angle, the trouble of disassembling the warning light when transporting to the machine can be eliminated.
Cooling hose. nozzle. Piping joint
cooling hose
This hose is used on coolant nozzles of metal processing machinery and plastic hoses for other liquids. The combination of parts can be freely replaced in terms of angle, length, and caliber. The raw material is polyformaldehyde (POM), which is chemical-resistant, impact-resistant, and heat-resistant.
High pressure sprinkler head
Our company's new product, the cutting fluid spray head, has a spray port direction that can be fixed at any position and can be aimed accurately. Under normal use conditions, it can also respond to coolant pressure (low, medium, and high), and the flow rate will not be reduced even at the maximum tilt angle.
Nut
AN nut series
Locking nut suitable for fixing bearings. The materials used are SS400 (iron) and SUS304 (stainless steel).
Magnetic stand related products
Magnetic stand related products
It is fixed on the metal surface using strong permanent magnets and can be used as a fixture
to hold precision measuring instruments such as micrometers. It has a wide range of
uses.
Use the switch to easily switch the adsorption state. When the switch is On,
magnetic force is generated for strong adsorption. When it is switched to the Off state, it
can be easily removed.